3M BREW125-MS Coffee Tea Water Filtration System
3M Purification Inc. Water Filtration Products Models BREW120-MS and BREW125-MS single cartridge water filtration systems help provide high quality water for the perfect cup of coffee or tea by reducing the effects of sediment and chlorine taste and odor at flow rates up to 1.5 gpm (5.7 lpm). A proprietary slow release scale inhibitor reduces the ability of calcium and magnesium to form on the heating coils and cause downtime and unscheduled service maintenance.
BREW120-MS combines scale reduction with cyst, sediment and chlorine taste and odor reduction for up to 9,000 gallons (34,069 liters).
BREW125-MS combines scale reduction with sediment and chlorine taste and odor reduction from higher turbidity water for up to 10,000 gallons (37,854 liters).
3M Water Filtration Products BREW125-MS Coffee/Tea Water Filtration System is a single cartridge water filtration system that helps provide is high quality water for the perfect cup of coffee or tea by reducing the effects of sediment, chlorine taste and odor at flow rates of up to 1.5 gpm. A proprietary slow release scale inhibitor reduces the ability of calcium and magnesium to form on the heating coils and cause downtime and unscheduled service maintenance. The 3M BREW125-MS Coffee/Tea Water Filtration System combines scale reduction of sediment and chlorine, taste and odor reduction for up to 10,000 gallons.
Reduced Scale formation by the controlled release of proprietary scale inhibitors as tested by the 3M Purification.
Better Equipment Protection from reduced sediment particles that can clog the spray head.
Certified by NSF to Standard 42
FDA CFR-21 Compliant Materials
Valve-in-Head design simutaneously shuts off water, allowing the simple and virtually trouble free cartridge change-out
Sanitary Quick Change (SQC) encapsulated cartridge design
Inlet/Outlet: 3/8" FNPT
Flow Rate: 1.5 gpm
Capacity: 10,000 gallons
Micron Rating: 1 micron (nominal)
Media Type: Carbon Block
Max Water Temp: 100 F
Max Water Pressure: 125 psi
System includes a head assembly with integral mounting bracket and a single cartridge filter.
Port for optional downstream pressure gauge in top of head assembly.
Inlet and outlet plumbing connections are 3/8" FNPT.
System incorporates an internal automatic 1/4 turn shut-off valve.
Filter cartridges are o-ring seal type.
System maximum operating pressure of 125 psi (862 kPa) and operating temperature of 100F (37.8C).
Recommended service flow rate is up to 1.5 gpm (5.7 lpm).
Filter cartridges incorporate carbon block filtration medium and scale inhibitor.
System materials are NSF Standard 42 and/or FDA CFR-21 compliant.
Cartridges are sanitary in design, requiring no contact with the filter media during cartridge change-out.
Filter cartridges require no pre-activation.
NSF Performance Data Sheet (PDS) is included
Once the user has seen at least one product this snippet will be visible.